Oil tube sludge trap Triumph 650 750 twin 70-3903 crankshaft filter BSA 68-0185

This product is New - Oil tube sludge trap Triumph 650 750 twin 70-3903 crankshaft filter

You will get the brand new sludge trap oil tube that is pictured. Yes you will have to make sure this fits properly after fitment, This is the part we are receiving from the UK, Yes you will have to make sure the hole lines up, yes you might have to move some material to fit this part, If you are not up to the task please get a qualified engine builder to fit this trap. It seem that I always have to modify something to get it to fit, this seems normal to me because I have never worked on Japanese bikes or any bike except British bikes. I have talked to the manufacturer and this is what is available right now.

Tubes received have a rounded nose that goes to larger diameter in about 1/4 inch. These do not seat correctly, and upon insertion and tightening of the central flywheel bolt that holds them in place, the locating hole in tube is crushed on one side. Tightening flywheel locating bolt WILL NOT cause the tube to be pushed into drive side seating position. Trying to drive the sludge tube in to correct depth and locating hole position from screwed in plug end with a punch will bend the sludge tube!Tubes received have a rounded nose that goes to larger diameter in about 1/4 inch. These do not seat correctly, and upon insertion and tightening of the central flywheel bolt that holds them in place, the locating hole in tube is crushed on one side. Tightening flywheel locating bolt WILL NOT cause the tube to be pushed into drive side seating position. Trying to drive the sludge tube in to correct depth and locating hole position from screwed in plug end with a punch will bend the sludge tube!It can be fixed by machining down end of rounded tubes a few thousanths to about 1/2" back. I do not have access to my notes at this moment for correct outer diameter it needs to be cut down to.